JL Audio Fathom SA-600W, Руководство пользователя

Страница: 26 / 40

| Fathom SA -600W Page 26
L R
OUTPUTS
R L
INPUTS
PRE-AMPLIFIER SATELLITE AMPLIFIER
SA-600W REAR CONNECTIONS (RIGHT)
SA-600W REAR CONNECTIONS (LEFT)
SYSTEM CONNECTION DIAGRAM 5:
Two SA-600Ws to
Two-Channel Audio System
for Stereo Bass
The SA-600W is great for use in
two-channel audio systems due to its
onboard high-pass crossover. Stereo bass
can greatly enhance the imaging of your
system, however subwoofer placement
options can be limited (but it’s worth
the extra effort). With stereo bass, your
left and right subwoofers should be
placed nearby the left and right satellites,
respectively.
Using RCA-type cables, connect the
Left output of your preamp to the Left
“LINE INPUT” of one SA-600W and
the Right output from your preamp to
the Right “LINE INPUT” of the other
SA-600W. This feeds a full-range signal
to EACH amplifier - one amp for the
Left channel and one amp for the Right
channel.
Next, connect the Left “HIGH PASS
OUTPUT” from the Left SA-600W to
the Left input of your satellite’s stereo
power amplifier. Then, connect the Right
“HIGH PASS OUTPUT” from the Right
SA-600W to the Right input of your
satellite’s stereo power amplifier. This will
feed a high-passed filtered signal (bass
removed) to the Left and Right speakers
once the internal crossover (XO) is turned
ON. Removing the bass burden from
your satellites will greatly enhance their
performance. See the XO discussion on
page 21 for additional info.
Now that your equipment is
connected, refer to pages 28-31 and follow
the directions for RECOMMENDED
STEREO SYSTEM SETUP
PROCEDURES.
WARNING! TURN OFF THE SA-600W AND ALL OTHER EQUIPMENT IN THE
SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
WARNING