background image

SKU#011480   101017

Printed in U.S.A.

w w w . j l a u d i o . c o m 

10369 North Commerce Parkway • Miramar, Florida • 33025 • USA

“JL Audio”, “Ahead of the Curve”, “Fathom” and the JL Audio logo are registered trademarks of JL Audio, Inc. 
©2017 JL Audio, Inc. • U.S. PATENTS: #6,229,902 #6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #6,219,431 

#6,625,292 #D480,709  Other U.S. & Foreign patents pending.  Due to our policy of continuous product development, all 

specifications are subject to change without notice. 

8-inch Fathom®

 IWS Enclosure Specifications:

Specifications

Fathom® IWS-SYS-108

Fathom® IWS-SYS-208

Enclosure Type:

Single Ported Enclosure

Two Ported Enclosures

Driver(s):

8-in.  

(nominal diameter)

8-in.  

(nominal diameter)

in each of two enclosures

Frequency Response (anechoic):

24.9 Hz - 109 Hz (+/- 1.5 dB) 

-3dB at 24.6 Hz / 111 Hz 

-10dB at 23.4 Hz / 118 Hz

Effective Piston Area:

31.62 sq. in. 

0.0204 sq. m.

63.24 sq. in. 

0.0408 sq. m.

Effective Displacement: 

47.5 cu. in. (0.78 liters)

95.0 cu. in. (1.56 liters)

2 x 4 Enclosure Dimensions:

 (H) Height x (W) Width x (D) Depth 

Does not include L-Brackets or padding material.

61.26 in. x 14 in. x 3.25 in. 

1,565 mm x 355 mm x 83 mm

Cabinet Finish:

Black Texture-Coated

Grille Dimensions: 

 (H) Height x (W) Width

10.50 in. x 10.50 in. 

267 mm x 267 mm

Wall Opening Dimensions: 

 (H) Height x (W) Width

9.75 in. x 9.75 in. 

248 mm x 248 mm

Grille Finish:

White (paintable)

Содержание FATHOM IWS-SYS-108





















Отзывы: