manualshive.com logo in svg

JL Audio FATHOM IWS-SYS-108, Руководство по установке

Поделиться
Скачать
JL Audio FATHOM IWS-SYS-108 Скачать руководство пользователя страница 8

 | Fathom 

IWS

Page 8

INSTALLATION HARDWARE

The Fathom IWS-108 enclosure package includes all parts and hardware 

necessary for the installation of one (1) enclosure. Since a portion of the 

enclosure will be inaccessible after installation, we strongly recommend 

reading these instructions completely before beginning the installation 

process. Please note, these instructions are for the installation of one (1) 

enclosure. Simply repeat the steps to install additional enclosures.

 

TOOLS FOR INSTALLATION

Below is a list of recommended tools to perform the installation of the Fathom 

IWS-108 enclosure. Depending on the specifics of your installation, you may 

need additional tools, hardware and/or accessories. 

• Safety glasses

• Tape measure (100-inch minimum)

• Cordless drill/driver with #2 Phillips bit

• Drill bits

• Wire strippers

• Utility knife or scissors

• Wire cutters

• Right angle driver (optional)

• Pencil or Marker

• Drop cloth (optional)
• Masking tape (optional)

Содержание FATHOM IWS-SYS-108





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды