Dismantling/Setup/Commissioning
32/70
–
Insert the Schuko connector into the socket.
NOTE:
Make sure that the mains plug is always accessible so that
the unit can be disconnected from the mains plug. More
detailed information can be found in Section
'Commissioning', on page 17).
–
Set the on/off switch on the back of the unit to ‘On’.
–
Insert the AROMA card into the side opening on the
fan.
INSTRUCTIONS:
The films on the acrylic panels must always be removed to
ensure that the lamps can work safely.
The films on the panels must also be removed straight away
to avoid paint damage.