JK-Products DAYON LightSpa Beauty Скачать руководство пользователя страница 23

Страница: 23 / 70

Safety instructions and warnings

11/2021

1027959-00A

Operating instructions – 23/70

1.8

Exclusion of liability

Regardless of the legal grounds, liability of the JK Group shall be excluded if
damage can be attributed to one or more of the following causes:



improper use of the device;



improper assembly, commissioning, operation and maintenance of the
device;



operating the device with faulty safety equipment or improperly attached
or non-functional safety and protective equipment including warning
signs;



not complying with the information in the operating instructions regarding
transport, storage, setup, commissioning, operation and maintenance;



Unauthorised changes to the unit



inadequate monitoring of parts subject to wear;



repairs carried out improperly;



the use of non-original spare parts



emergencies and disasters resulting from the influence of foreign materi-
als or force majeure.



Use of untrained personnel or unqualified technicians.

Please note:
In the event of damage, JK-International GmbH shall assume no liability if the
damage is caused by improper setup!

Содержание DAYON LightSpa Beauty







































































Результаты поиска

Содержание DAYON LightSpa Beauty

Отзывы:

Похожие инструкции для DAYON LightSpa Beauty

Бренды по названию

Популярные бренды

JK-Products DAYON LightSpa Beauty, Руководство по эксплуатации

Результаты поиска

Содержание DAYON LightSpa Beauty

Отзывы:

Похожие инструкции для DAYON LightSpa Beauty

Бренды по названию

Популярные бренды