JK Exer FitLux 665, Руководство пользователя

Страница: 9 / 24

Step 4.
POSITIONED FOR OPERATION
7
TREADMILL OPERATION
CAUTION:
Before beginning a workout session make sure the safety key is properly placed onto the
computer console and the safety clip is securely attached to an article of your clothing.
Always start the treadmill while standing on the side rails but not on the running belt.
Allow the treadmill to reach a speed of at least1.0 KPH before walking on the running belt.
Before operating, please read this page first for familiarization of the detailed procedures for the
treadmill computer console and other important features. Then you may refer to the instruction on
the screen to operate.
BASIC INFORMATION
1. When safety key is removed:
There is no figure showing and you can read the instruction “ INSERT SAFETY KEY “ on the LCD.
2. When safety key is positioned:
It is in MANUAL mode, and all the functions are ready for quick start. AGE 30 is flashing, SPEED/
INCLINE dot matrix are lightening, 0 is preset for TIME, 70kgs is preset for WEIGHT, 170cm is preset for
HEIGHT, 24.2 (70/1.7 x 1.7) is preset for BMI.
Remarks:
When machine is in turning on mode, if not any button is pressed for 5 minutes, machine will
become turning off mode. Then any button can be pressed to resume to turning on mode.
Plug in the Power Cable into the socket at the
front of Main Frame.
There are two Balancers at the rear bottom of
Main Frame. Adjust these Balancers to make
sure the frame is stably positioned on the
ground for exercise.