5/17
please read this chapter carefully.
2.1Introduction to Front Panel
Figure 2
‐
1 shows the front panel of JK2516B
Figure 2
‐
1
Serial
number
Name
Explain
01
USB interface
HOST interface of USB
02
Power
It is the power switch.
03
Color
LCD
display
480*272 dot
‐
matrix, 24
‐
bit, 4.3
‐
inch TFT is used for
measurement setup and result display.
04
[FILE]
Press [FILE] to enter into the page of internal and
external File Manage.
05
[ENTER]
Press this key to terminate and store input data.
06
[TRIGGER]
When the trigger mode is set as MANU
(manual),
pressing this key can trigger the instrument manually.
07
[DISP]
Return measurement display interface
08
[SETUP]
Setup data
09
[OADJ]
Press [0 ADJ] to execute correction function.
010
Test terminal
4
‐
terminal test terminal is used to measure DUT by a
4
‐
terminal test cable.The color and arrow of the test
cable should correspond to that of socket on panel, thus
to avoid abnormal measurement.
011
Universal Arrow
Keys
There are four arrow keys: up, down, left and right arrow
keys.
012
0 KEY
Function for confirming software area options
013
Trademark and
Model
Show instrument trademark and model.
2.2Introduction to Rear Panel
