3/17
1)Introduction to Instrument, Unpacking and Installing
Thank you for your purchase and use of our products! This chapter will introduce
the
basic instrument performance, which is followed by notes of unpacking and
installing.
1.1 Introduction to Instrument
JK2516B is a DC Resistance Meter with color LCD display and touch function. Its
accuracy of 0.01% is able to meet general resistance test requirements. Better
measurement result is obtained for temperature
‐
sensitive resistors by the adoption of
temperature compensation function. Statistic function has the capacity to make statistic
analysis of massive test data.
JK2516B is a powerful test tool for all kinds of resistor design, detection, quality control
and production. Its high test speed is applicable to the spot
‐
check machines on
production lines. With multiple output data and comparison mode, JK2516B can meet
different test requirements ofdifferent resistor manufacturers. The prominent performance
makes the test results come up to IEC and MIL standard.
1.2Unpacking
Inspect the shipping container for damage after unpacking it. It is not recommended to
power on
the instrument in the case of a damage container.
If the contents in the container do not conform to the packing list, notify us or your dealer.
1.3Power Connection
1) Power supply: 90V~125V,190~250V
2)Power supply frequencies: 50Hz and 60Hz
3)Power supply power range: ≤30VA
4)L (line wire), N (neutral wire) and E (earth ground wire) of the power supply input
socket should correspond to the power plug of the instrument.
6) The instrument
has been specially
designed for decreasing
noise jamming
caused by the input in AC power terminal, but it is also recommended to use it in the
environment of low noise. If noises cannot be avoided, install a power source filter please.
WARNING: To avoid injury to personnel and damage to the instrument resulting
from electric shock, do sure that the earth ground wire is safely grounded.
1.4Fuse
The fuse is a standard configuration, so use the included custom fuse please.
1.5Environment
1)Do not store or use the instrument where it could be exposed to many dusts, great
vibration,
