25
OK
Function Confirm
F1
、
F2
、
F3
、
F4
Corresponding to the selected setting in the Options menu 1,2,3,4
2. Connector
ADO102 ADO104
Figure 2-1
Figure 2-1
Figure 2-1 CH1-CH2: Input connectors for waveform display, the left is CH1,
the right is
CH2, "COM" and "VΩ" is used to connect the black and red pen.
Figure 2-2 CH1-CH4: used to display the input waveform connection. "COM"
and "VΩ" is used to connect the black and red pen.
3. Automatically set
ADO has an automatic setting function. According to the input signal,
automatically adjusting the voltage stall, time base, and triggering the best way
to form display.
"AUTO" for automatically setting.
● If there is more than one channel signal, the channel with the lowest
frequency signal as the trigger source.
● Found no signal, connect the channel 1 to a signal, press "AUTO" button. As
shown in figure 2-3:
Figure 2-3
V
Ω
COM
CH4 CH3 CH2 CH1
V
Ω
COM
CH2 CH1
