JHCTech KGEC-6300 Скачать руководство пользователя страница 55

Страница: 55 / 64

User’s Manual

This item enables you to save

the changes that you have made and reset.

Discard Changes and Reset;

This item enables you to discard

the changes that you have made and reset.

Save Changes;

This item enables you to save

the changes that you have made.

Discard Changes;

This item enables you to discard

the changes that you have made.

Restore Defaults;

This item enables you to restore the system defaults.

Save as User Defaults;

This item enables you to save the changes as user defaults that you have made.

Restore User Defaults;

This item enables you to restore the user defaults.

3.3 Updating the BIOS

The BIOS (Basic Input and Output System) Setup Utility displays the system’s configuration status and

provides you with options to set system parameters. The parameters are stored in battery-backed-up CMOS

RAM that saves this information when the power is turned off. When the system is turned back on, the

system is configured with the values you stored in CMOS.

The BIOS provides the underlying driver for hardware resources and is the bridge between hardware and

operating system. Now hardware and various applications are constantly updated. When your system

encounters problems, such as the system does not support the latest published CPU, you need to upgrade

your BIOS.

NOTE

：

1. Only upgrade the BIOS if you encounter problems and need to.

2. To upgrade the BIOS, please use the BIOS read/write program attached to our driver CD or download

the updated version of the program from the relevant website.

3. Do not turn off the power or reboot the system during the upgrade process, so your BIOS data will be

damaged and the system may not boot.

4. After the refresh is complete, you need to manually optimize the LOAD Default.

5. To prevent accidents, please backup the current BIOS data first.

Содержание KGEC-6300

































































Результаты поиска

Содержание KGEC-6300

Отзывы:

Похожие инструкции для KGEC-6300

Бренды по названию

Популярные бренды

JHCTech KGEC-6300, Руководство пользователя

Результаты поиска

Содержание KGEC-6300

Отзывы:

Похожие инструкции для KGEC-6300

Бренды по названию

Популярные бренды