JHCTech KGEC-6300 Скачать руководство пользователя страница 57

Страница: 57 / 64

User’s Manual

The KGEC-6300 comes with a CD-ROM that contains all drivers and utilities that meet your needs.

4.1 Follow the sequence below to install the drivers:

Figure 5.1 win7 drivers

Step 1 – Install Audio Driver

Step 2 – Install Chipset Driver

Step 3 – Install Graphic Driver

Step 4 – Install LAN Driver

Step 5 – Install ME Driver

Please read instructions below for further detailed installations.

4.2 Installation:

Insert the STX-I952 CD-ROM into the CD-ROM drive. And install the drivers in turn.

Step 1 – Install Graphic Driver

1. Double click on the Display folder and double click on the Setup.exe

2. Follow the instructions that the window shows

3. The system will help you install the driver automatically

Step 2 – Install Audio Driver

1. Double click on the Audio folder and double click on the Setup.exe

2. Follow the instructions that the window shows

3. The system will help you install the driver automatically

Step 3 –Install LAN Driver

1. Double click on the LAN folder and double click on the Setup.exe

Содержание KGEC-6300

































































Результаты поиска

Содержание KGEC-6300

Отзывы:

JHCTech KGEC-6300, Руководство пользователя, Страница: 57 / 64

Результаты поиска

Содержание KGEC-6300

Отзывы: