JHCTech KGEC-6300 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 64

JHCTech KGEC-6300 Скачать руководство пользователя страница 45

User’s Manual

40

This item is used to set the EFI storage Option ROM boot or the traditional storage Option ROM boot.

Video

This item is used to set EFI display Option ROM startup or traditional display Option ROM startup.

Other PCI devices

This item is used to set the EFI PCI device Option ROM boot or the traditional PCI device Option ROM

boot.

▶

USB Configuration

USB configuration, enter this sub-menu, there will be USB-related detailed settings.

Legacy USB Support

This item is used to set the USB interface support. If you need to support USB devices under DOS, such as

U disk, USB keyboard, etc., set this item to [Enabled]. Otherwise, select [Disabled].

USB Mass Storage Driver Support

USB mass storage device support switch.

USB Transfer time-out

This item Sets the timeout period for control, batch, and interrupt transmission. The default is 20 seconds.

Device reset time-out

This item sets boot command timeout of the large capacity USB disk. The default is 20 seconds.

Device power-up delay

This item sets boot command delay of the large capacity USB disk. The default is Auto.

«
...
43
44
45
46
47
...
»

Содержание KGEC-6300

































































Отзывы:

Нет отзывов