JH Industries Copperloy EDGE-OF-DOCK SEL Series, Инструкция по установке и эксплуатации

Страница: 21 / 42

21
JH INDUSTIRES INC.
WARNING
!
Never use a fork truck or other material handling
equipment to lower the ramp and lip section.
6. Proceed with loading or unloading.
7. Return the dockleveler to the stored position
when entry to the truck is no longer required.
7.1 Re - insert hand lever, into lever
socket located on right side of ramp
plate.
Keep both hands firmly on the hand lever while
raising or lowering the dockleveler. Keep other
body parts clear of hand lever travel path while
raising or lowering the dockleveler. Do not use
legs or feet to move or hold hand lever.
7.2 Pull back on the hand lever until the
lip clears the truck bed. (See Figure
21).
FIGURE 21
7.3 Raise hand lever and allow the ramp
and lip to lower to their stored
position. (See Figure 22).
FIGURE 22
7.4 Remove hand lever.
8. Un - chock or release truck
Do not allow the truck to leave before properly
storing the dockleveler. If the truck pulls away
from the dock before the dockleveler is stored,
the lip will fall to the pendant position. You must
use the hand lever to return the dockleveler to
its dock level (stored) position. Failure to do so
could result in death or serious injury.
9. Tell truck driver “Your truck may now leave the
dock.”
OPERATION,
CONTINUED
WARNING
!
WARNING
!