JGR TLS5 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 54

background image

TLS5 User Manual

TLS5-UM-00001 Rev 002

26

Specifying the Command Path

In order to use a command in the command tree, the meter must know the full
path  to  the  command.  If  the  command  is  the  first  command  in  the  program
message,  the  command  header  must  contain  the  full  path  to  the  command.
Subsequent  commands  in  the  same  program  message  are  automatically
referenced  in  the  same  path  as  the  previous  command,  unless  a  colon  (  :  )

precedes the command’s command header, in which case the full path to the

command must be included in the command header.

[:SOURce]

:WAVelength <wavelength>

The following program messages are valid:

SOUR:WAV 1310;WAV?
SOUR:WAV 1310;:SOUR:WAV?
STAT:OPER:ENAB 5;ENAB?

The following program message is

NOT

valid:

SOUR:WAV 1310;SOUR:WAV?

(no colon before second command)

Default Commands

Default commands are commands that do not need to be explicitly included in
the  command  path.  If  a  default  command  for  a  path  exists,  it  is  enclosed  by
square  brackets  ([  ])  in  the  command  tree.  If  a  default  command  is  implied  in
the  first  command  of  a  program  message,  the  command  path  for  subsequent
commands  is  determined  as  if  the  default  command  had  been  explicitly
included in the first command header.

[:SOURce]

:WAVelength <wavelength>

The following program messages are valid:

SOUR:WAV 1310
WAV 1310

«
...
28
29
30
31
32
...
»

Содержание TLS5























































Отзывы:

Нет отзывов

Похожие инструкции для TLS5

Бренд: Campbell Страницы: 22

Бренд: Campbell Страницы: 32

Бренд: Campbell Страницы: 40

CR3000 Micrologger

Бренд: Campbell Страницы: 12

Бренд: R.M. Young Страницы: 8

Бренд: Campbell Страницы: 21

Бренд: aci Страницы: 5

Бренд: Dräger Страницы: 538

Vario 4 Typ 4.5.1

Бренд: techem Страницы: 142

Бренд: DeltaOHM Страницы: 26

Orion Versa Star Pro Series

Бренд: Thermo Scientific Страницы: 4

WD-35606-00, WD-35606-05

Бренд: Oakton Страницы: 10

Бренд: Fuji Electric Страницы: 85

Бренд: Kawai Страницы: 110

Бренд: POSEIDON Страницы: 21

Бренд: Lafayette Instrument Страницы: 12

Бренд: AXE Страницы: 5

VACTEST GCD 200

Бренд: BUSCH Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды