JF TECH JRC-27F Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 82

JF TECH JRC-27F Скачать руководство пользователя страница 42

Figure 4.13 Daylight Saving Time (weeks) setting

Figure 4.14Daylight Saving Time (days) setting.

4.4.2

Encoding settings
* When the product is set to mixed mode / full analog channel mode, the system will
be set up in the encoding setting function, encoding settings can only function in an
analog channel encoding settings.
Set the video / audio encoding parameters including video files, remote monitoring and
other image parameters. The left part of each individual channel set encoding
parameters, the parameters set on the right part of the secondary stream, dual-stream
uses 1080P / 720P / 960H / D1 / HD1 / CIF / QCIF encoding rate of the stream all the
way to high definition for local storage, support all the way to low bit rate stream (QCIF
coding) for network transmission, taking into account local storage and remote network
transmission. Dual-stream network bottlenecks in the existing balance between image
quality and transmission quality, can break through the bottleneck of the network, the
flexibility to select the format according to the network bandwidth stream, to local HD
storage, while the rear end of the transmission of low stream networks.
Note: The main application of the secondary stream is for multi-channel real-time
monitoring, mobile monitoring under poor network.

«
...
40
41
42
43
44
...
»

Содержание JRC-27F



















































































Отзывы:

Нет отзывов