JF TECH JRC-27F Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 82

background image

Safety Precautions

The purpose of this content is to ensure that users use the product correctly to avoid danger

or damage to property. Before using this product, please read this instruction manual carefully
and retain it for future reference.

As shown below, precautions are divided into "WARNING" and "CAUTION" in two parts:
WARNING: ignoring warnings could result in death or serious injury.
Note: ignore the precautions could result in injury or property damage.

WARNING:

In the product installation, you must strictly follow all electrical safety procedures and the

use of regional countries.

1.

In the product installation, you must strictly follow all electrical safety procedures and
the use of regional countries.

2.

Please use regular factory supplied power adapter.

3.

Do not place more than one DVR connected to the same power (adapter overload may
produce excessive heat or cause a fire).

4.

When wiring, dismantling and other operations, please be sure do not connect the
power.

5.

The smoke phenomenon recorder, or produce odor, or noise, turn off the power
immediately and unplug the power cord and contact your dealer or service center.

6.

If the device is not working properly, contact your dealer or the nearest service center,
do not disassemble or modify the device in any way. (On the issue of unauthorized
modification or repair resulting from the Company is not liable).

CAUTION:

1.

Do not make objects fall to vigorously shake the device or equipment, and to place the
device away from the presence of magnetic interference. Avoid installing the surface
vibration or vulnerable areas (ignore this may damage the device).

2.

Installed may not be exposed to rain or very humid areas.

WARNING Precautions to prevent the potential

danger of death or serious injury

。

CAUTION Precautions to prevent the potential

danger of injury or property damage.

Thanks for purchasing our products, if you have any questions or need, please feel free to

contact us.

The manual is the DVR product manuals, support functions due to the different models differ,

please prevail in kind.

This manual is intended for you as an operating system and programming reference tool. You

can find information about the features and commands in this manual, as well as a detailed menu
tree and Quick Start Guide. Installation section provides the setup and installation of network dome
camera information needed. Before installing and using the system to fully understand the
information in this manual.

This manual may contain technical inaccuracies, or does not match the product features and

operations, or typographical errors. We will update the contents of this manual is based on product
enhancements, and will regularly update the product or process improvements or described in this
manual. Updated content will be added in the new version, without notice.

«
1
2
3
4
...
»

Содержание JRC-27F



















































































Отзывы:

Нет отзывов

Похожие инструкции для JRC-27F

Бренд: ZMODO Страницы: 22

Бренд: ACESEE Страницы: 26

Бренд: Watchguard Страницы: 88

Бренд: Pacific Communications Страницы: 107

Бренд: Winic Страницы: 37

Бренд: Hi Sharp Страницы: 64

Бренд: COP-USA Страницы: 85

Бренд: NEC Страницы: 64

Бренд: NEC Страницы: 63

Бренд: Appro Страницы: 88

Бренд: iFocus Pte Ltd Страницы: 53

Бренд: HIKVISION Страницы: 214

HDCC900 2 Series

Бренд: Abus Страницы: 54

Бренд: Winnov Страницы: 62

Бренд: Edge Страницы: 139

Бренд: HDbox Страницы: 88

Бренд: Swann Страницы: 2

SymDec 16 plus 4

Бренд: GE Security Страницы: 152

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды