JF TECH JRC-27F, Руководство пользователя

Страница: 25 / 82

[Stop] regardless of what state, select "Close" button, the channel will not output an
alarm signal
3.5.6 PTZ control
*PTZ control is a little different between hybrid mode & full digital mode:
Digital channel – the digital channel need link PTZ, the remote device should connect
with PTZ and with protocol correctly set also.
The functions include: PTZ direction control, step, zoom, focus, iris, and setup
operation, patrol between spots, trail patrol, boundary scan, assistant switch, light switch,
level rotation and so on.
Note:
1. Decoder A (B) line connects with NVR A (B) line. The connection is right.
2. [main menu]> > [system] > [PTZ Config] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
Figure 3.13 PTZ settings
【
Speed
】
Set the PTZ rotation range. Default range: 1 ~ 8.
【
Zoom
】
Click / button to adjust the zoom multiple of the camera.
【
Preset
】
Click / button calls the preset points, PTZ automatically turns to
the setting position.
【
Hide
】
Current interface will be temporarily hidden after click it.
【
Direction control
】
Control the PTZ rotation. 8 directions control is supportive. (4
directions in Front panel is supportive)
【
Advanced
】
Full-screen show channel image. Left press mouse and control PTZ to
rotate orientation. Left press mouse and then rotate the mouse to adjust the zoom
multiple of the camera.
【
Page switch
】
Switch between different pages.
【
Preset
】
1.Increase the preset point
By the arrow keys to adjust the good Yuntai location
，
Enter a number in
，