JF TECH JRC-27F Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 82

background image

3.

Basic Operations

Note: The button is grayed means did not support.

3.1

Turn on

Plug the power supply and turn on the power supply switch. Power supply indicator light
shining indicates turning on the video recorder. After the startup you will hear a beep. The
default setting of video output is multiple-window output mode. If the startup time is within
the video setting time, the timing video recording function will start up automatically. Then
the video indicator light of corresponding channel is shining and the DVR is working
normally.
Note:
1. Make sure that the input voltage corresponds with the switch of the DVR power supply.
Power supply demands: 220V±10% /50Hz.
Suggest using the UPS to protect the power supply under allowable conditions.

3.2

Turn off

There are two methods to turn off the DVR. Right click mouse to get a desktop shortcut
menu ,then choose Logout option is called soft switch. Pressing the power supply switch is
called hard switch.
Illumination:

1

、

Auto resume after power failure

If the DVR is shut down abnormally, it can automatically backup video and resume previous
working status after power failure.

2

、

Replace the hard disk

Before replacing the hard disk, the power supply switch in the real panel must be turned off.

3

、

Replace the battery

Before replacing the battery, the setting information must be saved and the power supply
switch in the real panel must be turned off. The DVR uses button battery. The system time
must be checked regularly. If the time is not correct you must replace the battery, we
recommend replacing the battery every year and using the same battery type.

Note: The setting information must be saved before replacing the battery otherwise
information will lose.

3.3

System Login

When the DVR boots up, the user must login and the system provides the corresponding
functions with the user purview. There are two user settings. The names are admin, and
default and these names have no password. Admin is the super user purview; default’s

«
...
13
14
15
16
17
...
»

Содержание JRC-27F



















































































Отзывы:

Нет отзывов

Похожие инструкции для JRC-27F

Бренд: Odyssey Technologies Страницы: 4

Бренд: M-Audio Страницы: 10

Бренд: D-MAX Страницы: 13

Бренд: Navitel Страницы: 78

Бренд: EverFocus Страницы: 152

Бренд: XtendLan Страницы: 150

DMS 180 III Enterprise

Бренд: dallmeier Страницы: 103

Бренд: Hi Sharp Страницы: 64

Бренд: Bolide Страницы: 58

Бренд: U.S. Security Solutions Страницы: 52

Бренд: Vpon Страницы: 60

Бренд: Voyager Страницы: 31

Бренд: Berghoch Страницы: 20

Бренд: Overmax Страницы: 28

Бренд: Chipatronic Страницы: 5

DS-7200-S Series

Бренд: HIKVISION Страницы: 41

DS-7000HI Series

Бренд: HIKVISION Страницы: 137

Бренд: Saten Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды