7. Crash test
Fiber Crash Testing is a very quick and easy step to be completed before attempting the installation of
fiber with the MJet V0 HD. This test is necessary to set the push force control of the motor below the point
that the MJet V0 HD may cause fiber damage as a result of over pushing or encountering an obstruction
in the sub-duct system.
Every fiber has different pushing values and these values vary depending on duct I.D.
Always wear protective equipment: hard
hat, safety glasses, safety shoes and work gloves.
IMPORTANT
For the Crash Test to work properly, use the same size fiber and pipe that will be used for the job. Jetting
cannot be responsible for any fiber damages.
Crash Test: For all types of fibers > 0,5 mm diameter
The pushing force is adjusted by pressing the Menu button and set with + and – button. To return to main
screen, hold menu button again.
Please observe:
For model V0 HD, the preset pushing force is 15N (but can be adjusted from 6-200N).
10
6. Display functions
