Jetter AG
Parameterization | 8
User Manual – JXM-IO-E30
36 / 70
8 Parameterization
8.1 Concept and control
The concept of the JXM-IO-E30 is based on the assignment of interfaces to the inputs and out-
puts of the device. Each input and output of the device is called a port and can be configured.
The function of a port is determined by assigning an interface to it. Each interface contains pa-
rameters, values and a state:
■
Parameters can be assigned to each interface.
■
Information can be transmitted and set via values to any interface.
■
The status provides information about the status of the interface.
I/O port
I/O interface ID 1
I/O interface ID 2
I/O interface ID 3
I/O interface ID 4
Values
Parameters
Status
Values
Parameters
Status
Values
Parameters
Status
Values
Parameters
Status
Fig. 11:
Concept and control
8.1.1 Configuration options of connections
The table below shows an overview of the ports and the respective interfaces:
Ports
Description
Supported interfaces
AI_1 … AI_8
Analog inputs
AI_VOLTAGE
AI_CURRENT
DI_PNP
DI_P_1 … DI_P_4
Digital inputs
DI_PNP (DI_NPN only for DI_P_1)
FI_PNP (FI_NPN only for DI_P_1)
ENCI_PNP (each for DI_P_1 and
DI_P_2 as well as for DI_P_3 and
DI_P_4)
PWMi_H3_1 … PWMi_H3_4
PWM outputs
PWMO_HS3, CPWMO_HS3, DO_HS3
DI_NPN, DI_PNP
