Jetter JM-208-480-OEM, Руководство пользователя

Страница: 92 / 128

12 Ethernet Interface (Option)
92 Jetter AG
12.3.2 The DIP Switches
The switches are evaluated at switching on the JetMove 208-480...-OEM. Switches
1 through 8 influence the IP address; switches 9 through 10 influence starting the
operating system.
Start-Up Process
After power-up, the switch has no influence to the interface functions. The current
position of the switch can be scanned in register 10181.
12.4 Setting the IP Address
There are 4 ways to assign an IP address to a JetMove 208-480...-OEM. The actually
used IP address can be read from register 2931.
12.4.1 Default IP Address
If, at activating the controller, DIP switches 1 through 8 are in "OFF" position, the
JetMove 208-480...-OEM has got IP address 192.168.10.15.
If, at the other possibilities of setting, it is not clear which IP address is being used, a
definite state can be achieved by this way of "emergency setting".
12.4.2 IP Address Taken out of the
Configuration Store
If, at activating the JetMove 208-480...-OEM, the DIP switches 1 through 8 are in
"ON" position, the JetControl has got the IP address saved in the configuration store.
The configuration store can be accessed by means of the "/System/cfgvar.ini" file or
registers 10131 through 10145.
Switches 9 and 10
Position Meaning
9 = OFF, 10 = OFF (NORMAL
OPERATION) Normal function of the Ethernet
interface
9 = OFF, 10 = ON (LOAD) The boot process proceeds as far as to
the initial program loader of the
Ethernet interface
9 = ON Reserved