Jetter JM-208-480-OEM, Руководство пользователя

Страница: 79 / 128

JetMove 208-480 9.1 Fault Messages
Jetter AG 79
F 12 Earth fault One or more
phases of the
motor cable or
inside the motor
have been short-
circuited to earth – Immediate
motor power
disable
– Check the motor cable
and the motor
– Acknowledge failure
F 13
(combined
with F00) Internal
checksum error An internal
checksum error
has occurred – Immediate
motor power
disable
– Switch the 24 V supply
off and on again
– If the error occurs
repeatedly, return the
amplifier for repair
F 14
(combined
with F 00) Internal
communication
error An internal
communication
error has occurred – Immediate
motor power
disable
– Switch the 24 V supply
off and on again
– If the error occurs
repeatedly, return the
amplifier for repair
F 15 The hardware
enable is missing The software
enable is given
without a hardware
enable – Immediate
motor power
disable
– Disable the drive by
means of the software
– Acknowledge failure
F 16 Power input
overcurrent The current at the
power input was to
high – Immediate
motor power
disable
– Check input voltage
– Reduce mechanical
power of the motor
– Acknowledge failure
F 17 Trip of software
limit switch The actual position
is outside the
range of the
software limits; a
software limit
switch has been
operated – Stop at max.
current
(max.
torque)
– Check destination
position
– Acknowledge failure
– Run axis back inside the
range of software limits
(monitoring the software
limit switches is
activated automatically
when the axis has
reached this range
again)
F 18 Trip of hardware
limit switch One hardware limit
switch has been
operated – Stop at max.
current
(max.
torque)
– Check target position
– Check reference
position
– Acknowledge failure
– Return the axis within
the hardware limits
(monitoring the software
limit switches is
activated automatically
when the axis has left
this range)
Fault Message Table JetMove 208-480
Fault
Number Type of Fault Description Response to
Faults Troubleshooting