manualshive.com logo in svg

JETStream TwinForce Series, Руководство по эксплуатации

Поделиться
Скачать
JETStream TwinForce Series Скачать руководство пользователя страница 74

66

Operation Manual

Assembly

1.  Install the discharge valve onto the valve 

body. The shiny mating surface faces the 

holes on the valve body. Place the dis-

charge spring into position on the valve 

(Figure 115).

2.  Lock the spring in its retaining groove. 

Use a screwdriver to push the spring 

in place. Start at the base of the spring 

and follow along the coils to the top of 

the spring until it locks in its retaining 

groove.

3.  Position the suction valve in the valve 

body (Figure 116).

4.  Insert the suction valve spring and spring 

retainer into the valve body. Ensure the 

ledge the retaining ring sits on is posi-

tioned properly (Figure 117).

5.  Press the spring retainer downward and 

install the retaining ring onto the suction 

valve.

6.  Install the new O-rings and backup rings 

into their respective positions on the as-

sembly (Figure 110).

Figure 115:  Discharge Installation.

Discharge 

Spring

Discharge 

Valve

Spring Retainer

Spring

Suction Valve

Retaining Ring

Figure 116:  Suction Valve Installation.

Figure 117:  Spring and Retainer Installation.

Ledge

Spring Retainer

Spring

Содержание TwinForce Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды