VAC Controller CVS/VIP
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. 121315143
Doc. Rev.: 5 (2020-11-30)
11
2.6.5 - Pump start-up count
The total number of times the
pump has started.
This is a read out only and
cannot be reset.
2.6.6 - Full tank count
A counter for the number of
times the full tank alarm has
been activated.
This is a read out only and
cannot be reset.
2.6.7 - Reset counters
To reset the number of times
the pump has started and the
number of operating minutes.
Will reset this counter only.
2.6.8 - System Status
Firmware - Shows the current
software version on the
controller.
Alarm sound - ON (default) /
OFF function will deactivate all
the sound from the controller
(alarm and key stroke
sounds).
Alarm outputs - NC (default)
(normally closed) / NO
(normally open) alarm output.
Choose if alarm output "long
running time", "full tank" and
"low vacuum" should be
normally open or normally
closed. Alarm output "Power
ON" should always be pre-set
at NO and is not included in
this selection. This setting will
not reset after power failure or
factory setting.
___________________________________________________________________________________________________________________
● Language 2.7
2.7.1 - English (Default)
2.7.2 - Norwegian
2.7.3 - German
2.7.4 - Spanish
___________________________________________________________________________________________________________________
