Jetblack Safety SAFETY CLEANING BOOTH, Руководство пользователя

Страница: 21 / 22

21 of 22
13. WARRANTY INFORMATION
JetBlack Safety is a trading name of Air Control Industries Ltd (ACI). Subject to the restrictions mentioned below, your
equipment Warranty covers the repair or replacement, free of charge, of parts acknowledged to be faulty by Air Control
Industries Ltd (ACI), as well as the labour necessary to repair the equipment for twelve months from the date of shipment.
Please Note That
•
The Warranty is dependent upon the manufacturers recommended maintenance and servicing being carried
out at the time intervals specified in this Manual. It may be necessary to provide proof of this (maintenance
records, invoices etc).
•
The motor within the Cleaning Station unit has a working life of 500 hours and the brushes may need
replacing after this period. This is considered to be normal wear associated with the use of the motor and
therefore not covered under the Warranty. Spares can be purchased from ACI.
•
Work carried out under the Warranty does not extend the Warranty. In particular, the replacement of a part
during work carried out under Warranty does not extend the lifespan of the part. The Warranty which covers
the replacement part expires on the date of expiry of your equipment’s Warranty.
•
Parts replaced under the Warranty become the property of ACI.
•
At no time will ACI be liable for any of the costs to the buyer for labour, transportation or down-time resulting
from defective equipment furnished by ACI or our suppliers.
What The Warranty Does Not Cover
•
Maintenance and servicing operations necessary for the correct operation of the equipment, mentioned in
the Maintenance sections of this document.
•
If the defect was due to accident or misuse, operation in an application not approved by ACI or an
unauthorised modification or repair.
•
Consumable parts and their routine replacement, such as filters etc.
•
The replacement of parts that are subject to normal wear associated with use of the equipment, if this
replacement is not the consequence of a fault.
•
Damage caused by natural phenomena, hail, flooding, storms or other atmospheric hazards, as well as
damage caused by accidents, fire or theft.
Our products are manufactured in compliance with applicable international standards and regulations. If you have any
queries regarding the use of our products, or if you are planning a special application, please contact ACI.
14. WEEE RECYCLING & MATERIALS DISPOSAL
https://www.aircontrolindustries.com/about-us/certificates-approvals/