Jet JWP-15B, Инструкция по эксплуатации и каталог запасных частей

Страница: 8 / 36

8
Read and understand all setup
and assembly instructions before attempting to
assemble the machine. Failure to comply may
cause serious injury.
IMPORTANT: If you purchased the helical head
planer, before operating the machine verify that
each knife insert has been properly torqued. Refer
to
sect. 7.3 for information.
5.0 Setup and assembly
Remove all contents from shipping carton. Do not
discard packing material until saw is assembled and
running satisfactorily.
Inspect contents for shipping damage or part
shortages. If either is discovered, report it
immediately to your distributor. NOTE: Check
machine first in case parts have been pre-installed.
5.1 Shipping contents
See Figures 5-1 and 5-2.
Included with models 15B and 15BHH:
1 Planer (not shown)
1 Handwheel assembly – A
1 Dust port – B
1 Torx point screwdriver T30 (with magnets) – C
1 Operating Instructions and Parts Manual (not
shown)
1 Product registration card (not shown)
Included with model 15B only:
2 Steel extension tables ( not shown)
1 Hex wrench 6mm – D
1 Knife gauge – E
1 Hardware package (p/n JWP15B-HP)
1 Socket hd cap screw M5x12 – HP1
1 Lock washer M5 – HP2
11 Socket hd button screws M6x12 – HP3
8 Socket hd cap screws M8x16 – HP4
Included with model 15BHH only:
2 Cast iron extension tables ( not shown)
2 Star point screwdrivers – F
5 Knife inserts – G
10 Knife insert screws (not shown)
1 Hardware package (p/n JWP15BHH-HP)
1 Socket hd cap screw M5x12 – HP1
1 Lock washer M5 – HP2
11 Socket hd button screws M6x12 – HP3
6 Hex cap screws M8x25 – HP5
6 Set screws M8x20 – HP6
Figure 5-1: contents (not to scale)
Figure 5-2: hardware packages
5.2 Tools required for assembly
4mm hex wrench
6mm hex wrench (for JWP-15B only)
Torx point screwdriver T30 (for JWP-15B only)
13mm open-end wrench (for JWP-15BHH only)
16mm open-end wrench
Straight edge
Level
5.3 Location and cleaning
Use a pallet jack to move the planer close to its final
location. Remove any retaining hardware securing
planer to pallet, and carefully slide planer off pallet
and onto floor.
Use an assistant to slide planer
off pallet.