1. SLIDING TABLE (TOP)
2. UNDER CARRIAGE ASSEMBLY
3. FENCE EXTENSION BLOCK
4. MITER FENCE
5. FENCE PIVOT BRACKET
6. FENCE CLAMPING BRACKET
7. SET SCREWS TO LEVEL EXTENSION WING (4)
1
2
4
3
14
13
7
5
6
12
10
11
9
8
8
.
FENCE ADJUSTMENT KNOBS (2)
9.
EXTENSION WING
10. FLIP STOP
11. SAW POWER SWITCH MOUNTING BRACKET
12. LARGE 1” DIAMETER X 3/16” WASHERS (4)
13. EXTENSION WING MOUNTING HARDWARE
14. HEX WRENCHES:
3/32, 1/8", 5/32, 3/16",
AND 3/16" T-HANDLE.
PARTS AND COMPONENTS LIST
Before operating any machinery, power tool or
accessory read and understand all safety
instructions in the owner’s manual for the tool,
machine or accessory in use.
!
If you do not have a manual, contact the
manufacturer and obtain one before using any
power tool or accessory or equipment.
!
Always wear proper eye protection that is in
compliance with ANSI safety standards when
operating any power tool or machinery.
!
Always use proper guards and safety devices
when operating power tools and machinery.
!
Carefully check accessories or other equipment
before each use. Do not use if damage or defect
is suspected.
!
Do not wear loose clothing or jewelry that may
catch on tools, machinery, accessories or other
equipment.
!
Always make sure the fence, gauge and all
adjustable knobs are locked firmly into a tight
position before each use.
!
Before making any cut, always be sure the
miter gauge fence or any other part of this
accessory or other accessories used with this
product offer a safe clearance and will not
make contact with the saw blade or any other
cutting source.
!
Do not sit on, lean on or place heavy objects on
top of the sliding table. Be careful not to over
load the sliding table with large or heavy
materials to the point of possibly tipping over
the table saw. This safety precaution is
especially important when the sliding table is
at full extension.
IMPORTANT SAFETY PRECAUTIONS
