JESS WELDING Power Plasma 2, Руководство по эксплуатации

Страница: 10 / 28

Power Plasma 2
Operating Manual Page 6
4. Technical Data
Supply voltage 3-phase 400 V, 50 Hz
Max. power draw 45 kVA
Fuse 63 A slow
Set-point range infinitely variable 20 - 210 A
Max. open-circuit voltage 345 V
100 % duty cycle 210 A/164 V
Max. cutting thickness, quality cut 60 mm
severance cut 75 mm
System of protection IP 23
Insulation class H (180° C)
Type of cooling F
Dimensions L x W x H (mm) 1020 x 575 x 1070
Weight 366 kg
Type of torch
Length: 6m Length: 12m
ABIPLAS CUT 200 W or ABIPLAS CUT MT 200W
(rate of gas flow about 40l/min)
3,5 bar 4,0 bar
JHP 251 or JMP 250
(rate of gas flow about 120l/min)
4,5 bar 5,5 bar
Authorized for welding under increased electrical hazard
Manufactured in acc. with European Standards EN 60 974-1 und EN 60 974-10