JESS WELDING Power Plasma 2 Скачать руководство пользователя страница 2

Страница: 2 / 28

General information’s:

These operating instructions are intended to ensure safe and efficient work with this

cutting unit.

Prior to initial operation of the unit, read the instructions carefully.

The information contained in this manual should be made available to all operational

staff. These in structions should always be kept ready-to-hand, near the machine.

Warning:

Electromagnetic compatibility EMC (IEC 60974-10):

This class A cutting unit is not provided for use in housing areas, where the electric

power supply comes from a public low voltage supply.

It may possible, that through wire fixed or radiate disturbances, it isn’t easy to

guarantee electromagnetic compatibility in these areas.

INFORMATION: The user is responsible for the trouble, which the machine generates

during the operation. He must rate and consider possible electromagnetic problems

in the neighbourhood.

Attention:

Safety check:

This cutting unit has to be safety checked least once a year by Jäckle & Ess System

GmbH

or another special qualified electrician according to the harmonized standard

IEC 60974 – 4

Safety, maintenance and inspection of arc welding equipment in use

Power cord and power plug:

According to the standard DIN EN 60974 - part 1, point 10.9 and 10.10, paragraph b)

...must these be rated for the largest

effective

line current I

1eff

(see rating plate)...

They do NOT have to be rated according to the maximum line current!

Warranty:

INFORMATION: Improper repair or servicing, technical modifications of the product,

unauthorized, not strictly from Jäckle & Ess System GmbH permitted modifications, as

well as

carelessness at the installation or use, or the nonobservance of care in own affairs

lead to the extinction of every warranty.

Protection notice ISO 16016 observed

Содержание Power Plasma 2





























Результаты поиска

Содержание Power Plasma 2

Отзывы:

Похожие инструкции для Power Plasma 2

Бренды по названию

Популярные бренды

JESS WELDING Power Plasma 2, Руководство по эксплуатации

Результаты поиска

Содержание Power Plasma 2

Отзывы:

Похожие инструкции для Power Plasma 2

Бренды по названию

Популярные бренды