JESS WELDING Power Plasma 2, Руководство по эксплуатации

Страница: 9 / 28

Power Plasma 2
Operating Manual Page 5
3. Brief description
The Plasma Cutting Unit Power Plasma 2 has been developed in robust technology.
It excels in multipurpose application both for manual cutting operations and in combina-
tion with automatic or robot-operated cutting processes.
Its Operating principle is characterised by the following:
Compressed air as plasma gas for the plasma torch
A high-grade filter welding regulator is standard equipment on this unit.
The finely filtered, pressure-controlled air expands in the plasma torch body and serves as
plasma gas.
Water cooling system
To protect the torch body against high thermic load, the machine has an high efficiency
water cooling system.
Inside torch connection for the plasma torch
All connections are comfortable placed behind a flap.
HF-ignited pilot arc.
A pilot arc which is initiated by a high-frequency spark starter ensures reliable ignition of
the cutting arc even on lacquered workpieces. In addition, this appliance is suited for
automatic cutting processes.
Automatic cutting process
via Control board .
All important function are available at the Remote Control socket.
Safety cut-out.
In the event of a pilot-arc failure, the current source switches off after approx. 2 seconds to
protect the operator from a build-up of no-load voltage.
Plasmaignitionbox PZB21 (Option)
To work with a very long plasma torch, it is possible to connect a optional
plasmaignitionbox. All connection for this box are made in the machine.
Service friendly design
All components are Easy to change.