BA-40100-0-V04 | Maintenance Instructions TOPAX DX | 31
Chapter 16: Menu structure and configuration
16. Menu structure and configuration
16.1 TOPAX
®
DX menu
In this chapter all of the TOPAX DX menus are presented and
their operation exemplified. The Menus are as a result shown on
the display with its coloured presentation and high resolution in
clear text and clearly arranged.
Standard display
If there are no entries in the TOPAX DX within 5 minutes, the
device turns to the standard display (see diagram 16.1).
mg/l
mV
ºC
comb. cl.
temp.
REDOX
free chlorine
pH value
7.04
0.39
719
mg/l
0.09
26.3
eff. cl.
0.30 mg/l
Topax DX
14:28 06.02.2007
Fig. 16.1: Standard display of TOPAX
®
DX with measurements of total chlorine
content.
The bar shown underneath each data represents the size of the
output signal. The colour of the display changes from green (0-
85 %) to orange (85 – 95 %) and rot (95 – 100%).
By pressing a random key you go to the main menu (menu 1).
IMPORTANT!
For a better overview, all menus are shown on the
display with an ID-number marked on the bottom line
on the left. The description of the individual menus in
the manual is identically numbered.
Menu 1 and 2: Main menu and Sub-main menu
mg/l
mV
pH
mg/l
menu 2
trend
calibration
setpoint
ESC
status
039 702 719 09
0
main-menu
1
Menu 1: The TOPAX DX main menu and output point to reach all further sub-
menus and their functions.
Menu serves as a sub-main menu (see menu ).
mg/l
mV
pH
alarms
controller
ESC
039 702 719 09
0
menu 2
recorder
night mode
service
mg/l
2
Menu : Extension of the main menu.
Through the main menu (menu1) and the sub-main menu (menu
) you can access all other sub-menus (see diagram 16.).
Menu Button
Remark
1
main menu
ESC
back to standard display
1.1
setpoint
setpoint configurattion of the controllers
1.
calibration
calibration of electrodes
1.3
trend
displays actual trend of the measurements in curves
1.4.1
status
displays TOPAX hardware configurationr
menu
swicth to menu
2
menu 2
ESC
back to the main menu
.1
controller
Optimization of the parameters of all configured
controllers (access to this menu can be protected by
a password).
.
alarms
Assigning the alarms to the related measurement
signals.
.3
recorder
Optimization of the analogue output loop (0/4-0
mA).
.4
night mode Selection auto switch ability and adjustment of the
new default.
5
service
More configuration menus
(access to this menu can be protected by a pass-
word).:
• configuration
• inputs
• autosetup
• network
• clock
• code
• DIN-contact
• alarm functions
• recorder
• display
• hardware /HW-Status
• outputs
• restart
• logfiles
• timer
• service code
• flocculation
• startup
• digital inputs
• language
Abb 16.: TOPAX DX submenue overview.
On the following pages all sub-menus are presented in ascend-
ing order and exemplified by means of a demonstrative example
