Jepson MAGPRO 40 2S Скачать руководство пользователя

Страница: 9 / 88

Gloves can be caught by the core drill machine

create serious injuries to hands.

10. The device may not be operated in a damp

environment

8.2. POWER SUPPLY AND GROUNDING

In the case of malfunction or a defect, the

grounding provides a path of lowest resistance

for the electric current in order to reduce the

risk of electric shock. The machine is equipped

with a power cable provided with an equipment

protective conductor and a grounded plug.

The plug must be plugged into a

suitable socket that is properly installed

and grounded according to all local

laws and regulations. Do not alter the

provided plug. If it does not fit into the socket, an

electrician must install a suitable socket.

9. START-UP

After unpacking the machine from the packaging,

verify if there is any visual damage. Place the

machine on a low carbon metal surface so that

it is solid and level. A minimal thickness of 25 mm

or 1 inch and at least 100 mm by 120 mm low

carbon steel is required for magnets to function

properly with sufficient holding force. Check for tool

magnetic clamping function. Secure the machine

with safety latching strap. Strap provides additional

tool holding security if magnet loosened or power

fails. Check that the tool is tightened securely before

operating tool. When additional low carbon steel

plate is used, make sure the steel is also secured

properly.

9.1. ELECTRICAL SAFETY CHECKS

Before inserting the power supply plug into the

socket of power source, make sure that it is a

grounded socket. Make sure the power source

voltage and frequency match the magnetic core

drill machine. In the case cable extensions are

used, operator must make sure that they are

also grounded. Only use extension cables with a

cable cross-section of 1.5mm². Only use approved

extension cables for the work place.

9.2. BEFORE STARTING WORK OR USE OF

MAGNETIC CORE DRILL MACHINE

Plug in tool by observing the electrical safety checks

described above. Turn on the magnet and check the

function of the magnetic holding power. Magnetic

core drill machine cannot be turn on unless the

magnet power is turned on first. This is a safety

feature and does not guarantee the magnet is set

up properly. Always check the magnet holding

power and proper tightening of the magnetic tool

before turning on the magnetic core drill machine.

Spindle Check:

Before inserting core drill or drill bits make sure the

machine spindle, tool holder, and the Weldon shank

are free of debris and any foreign objects. Before

use, the tool is not damaged nor worn out, and also

free of debris and any foreign objects. Damaged and

worn out tool may cause unexpected movement of

the magnetic core drill machine leading to danger

to operator and damage to machine. Good quality

core drill will ensure efficient work and safety.

Note:

Always use the appropriate ejector pin of the core

drill tool. Make sure the machine is turned off before

installing or removing the core drills. Tighten the

two Allen screws properly before starting. Adjust

the speed of the machine when the machine is off

and at stand still. Desired speeds selection, follow

the label on the motor housing of the machine.

Attention: Machine can only be turned

on when the magnetic clamp is

working. Will turn off when magnetic

clamp power is cut off. Allow the

overheated tool to cool off running at idle for a few

minutes.

10. OPERATIONS

Recheck the magnetic core drill machine is correctly

plugged in and connected to the correct power

source. Recheck to make sure the magnetic core

drill machine and the work piece is clamped

securely. Recheck to make sure the operator has

appropriate safety equipment if the work is above

ground. Recheck to prevent any injuries from

electrical shock and operating injuries from tool or

operator fallen off.

10.1. SPEED SELECTION OF MAGPRO 40 2S

With the tool properly set up. The speed selector

is at left side of gear box. The upper position is the

high speed. And the lower position is the low speed.

Adjust the speed only when tool is not turned on

and not rotating. Refer to the technical data section

of the manual for the rpm of both high and low

Содержание MAGPRO 40 2S

























































































Результаты поиска

Содержание MAGPRO 40 2S

Отзывы:

Похожие инструкции для MAGPRO 40 2S

Бренды по названию

Популярные бренды

Jepson MAGPRO 40 2S, Руководство по эксплуатации

Результаты поиска

Содержание MAGPRO 40 2S

Отзывы:

Похожие инструкции для MAGPRO 40 2S

Бренды по названию

Популярные бренды