Jepson MAGPRO 40 2S, Руководство по эксплуатации

Страница: 12 / 88

12. OPTIONAL ACCESSORIES
12.1. GENERAL ACCESSORIES
• HSS-Co core drills 30 mm Ø 12 - 130 mm
(490212 - 4902130)
• HSS-Co core drills 55 mm Ø 12 - 130 mm
(490512 - 4905130)
• „Goldfinger“ : TiN coated HSS-Co
core drills 30 mm Ø 12 - 60 mm
(490212TiN - 4902130TiN)
• HSS-Co core drill set 30 mm Ø 12, 14, 16, 18,
20, 22 + pilot pin (490145)
• Carbide tipped core drill set 30 mm Ø 1x12,
1x 14, 1x16, 1x18, 1x20, 1x22 mm + pilot pin
(490148)
• „Goldfinger“ core drill set TiN-coated 30 mm Ø
12, 14, 16, 18, 20, 22 + pilot pin (490145TiN)
• Drill chuck and adapter 13 mm (
490152A)
• Weldon adapter 19 mm for Fein core drills with
quick-in shank and + pilot pin / centering pin
(490154)
• Magnetic chip collector (490153)
• High-performance drilling and cutting oil
spray for optimal cooling and higher cutting
performance - Content: 400 ml (490020)
12.2. FOR THE MAGPRO 80 4S
• Drill chuck 16 mm + MK3 adapter (490164)
• Weldon 32 CM3 adapter for core drills from Ø
61 mm (490163)
13. QUOTATION
When returning a defective machine for repair with
cost estimate. We charge a handling fee of 50€, but
does not apply if a repair order or purchase of a new
machine is given.
14. SPARE PARTS
For current spare parts list with order numbers
please visit our website:
www.drycutter.com
15. WARRANTY
The warranty time (warranty according to the
commercial code) is 12 months from the day of sale
to the end consumer. It covers and is limited to the
free replacement of the defective parts or the free
repair of defects that are demonstrably due to the
use of imperfect materials during production or due
to assembly errors. Incorrect use or start-up and
unauthorized installations or repairs not specified
in the operating instructions void the warranty.
Parts that are subject to wear are also excluded
from the warranty. We expressly reserve the right
to make decisions on the warranty application. The
warranty is void if the device is opened by a third
party. Transport damages, maintenance work as
well as damage and malfunctions due to insufficient
maintenance are not covered by the warranty.
For warranty claims, the proof of purchase of the
device must be given by presenting the delivery
note, bill, or cash receipt. As far as it is legal, we
assume no liability for any personal, material or
consequential damages, in particular if the device
is used differently than for the purpose indicated in
the operating instructions, not installed or repaired
according to the operating instructions, or repairs
were executed by a layperson. We reserve the right
to perform repairs or maintenance over and above
the ones specified in these operating instructions at
the factory.
Exclusion of the JEPSON POWER warranty
The warranty also excludes:
• Wear parts such as: Switches, carbon brushes,
magnets, and Cutting tools (core drills, drills,
etc.).
• Parts that are subject to wear through use or
natural wear and tear, as well as tool defects
due to wear and tear due to normal conditions
of use or due to natural wear and tear.
• Tool failure due to non-compliance with the
instruction manual, unconventional use,
abnormal atmospheric conditions, improper
operating conditions, overload, or lack of
service or maintenance.
• Tool failure due to replacement parts or
additional parts that are not genuine Jepson
Power parts.
• Machines to which changes or additions have
been made.
• The minor differences from the intended use
of the device that are not material to the value
and suitability of the tool.
In the following cases, a guarantee claim for
damage to the magnetic base on the magnetic
drilling machines of our MagPro series is excluded:
1. Abnormal abrasion of the magnet surface due
to permanent movement of the machine on
metallic surfaces without lifting the device.
EN
12