16
MUTE FUNCTION
1. When
MUTE
button on unit or remote control is pressed, “MUTE” will flash on the
screen and the
audio output will be temporarily muted.
2. Press the MUTE button once again, the volume level and the audio output will return
to normal.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
3. If drop-outs or interruptions occur in the music during CD play,
or if the CD fails to play at all, its bottom surface may require
cleaning. Before playing, wipe the disc from the center
outwards with a good soft cleaning cloth.
4. Unplug the unit from the electrical power outlet immediately in case of malfunction.
Cleaning the Unit
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a
soft cloth slightly dampened with a mild soap and water solution. Never use abrasive
cloths or polishes as these will damage the finish of your unit.
CAUTION:
Never allow any water or other liquids to get inside the unit while cleaning.
Resetting the Unit
If the unit experiences a power surge or electric shock, it is possible that the internal micro-
controller may lock up and the unit will not respond to any commands from the panel
controls.
In this event, set the Power On/Off switch to OFF position, wait for one minute and then set
to ON position again to reset the unit. The reset operation clears the system memory and
all of your previous settings will be erased.
