E-8
6. Press the CLOCK SET BUTTON (#4) to confirm the hours. The minute digits will begin
flashing.
7. Repeatedly tap the TUNE - or TUNE + BUTTONS (#5 or #7) to set the minutes. Press
and hold the TUNE - or TUNE + BUTTONS (#5 or #7) to quickly scan through the
minute digits if needed.
8. Tap the CLOCK SET BUTTON (#4) to confirm the minutes and complete the time
setting process. The display will stop flashing and show the set time.
Note: If the unit was reset, you need to set the clock again.
ALARM OPERATION
The unit features a dual alarm clock.
Setting Alarm 1:
1. In standby mode, press and hold the ALARM 1 BUTTON (#8).
2. The ALARM 1 ICON (#22) will begin flashing and will continue flashing while setting
alarm 1.
3. Either “ON” or “OFF” will also begin flashing on the LCD DISPLAY (#12). Tap the TUNE
- or TUNE + BUTTONS (#5 or # 7) to change between “ON” (Alarm 1 ON) or “OFF”
(Alarm 1 OFF). Select “ON” (Alarm 1 ON) in order to set the alarm.
4. Tap the ALARM 1 BUTTON (#8) again to confirm the selection. The display will change
to the alarm time and the hour digits will begin flashing.
5. Repeatedly tap the TUNE - or TUNE + BUTTONS (#5 or #7) to set the hour. Press and
hold the TUNE - or TUNE + BUTTONS (#5 or #7) to quickly scan through the hour
digits if needed.
Note:
AM and PM ICONS (#20 & #21) are located above the clock digits on the LCD
DISPLAY (#12). Be sure that AM ICON (#20) is on if you want the set hours to be AM,
or the PM ICON (#21) is on if you want the set hours to be PM.
6. Tap the ALARM 1 BUTTON (#8) to confirm the hours. The minute digits will begin
flashing.
7. Repeatedly tap the TUNE - or TUNE + BUTTONS (#5 or #7) to set the minutes. Press
and hold the TUNE - or TUNE + BUTTONS (#5 or #7) to quickly scan through the
minute digits if needed.
8. Tap the ALARM 1 BUTTON (#8) to confirm the minute setting. The wake up options will
show on the LCD DISPLAY (#12).
bUZ
= wake to a beeping alarm
rAd
= wake to the last radio station you listened to
9. Tap the TUNE - or TUNE + BUTTONS (#5 or #7) to select the wake up option (Alarm or
Radio).
10. Press the ALARM 1 BUTTON (#8) to confirm and complete setting ALARM 1.
Setting Alarm 2:
Follow Steps 1-10 above, but use the ALARM 2 BUTTON (#10) in place of the ALARM
1 BUTTON (#8)
.
Содержание JEP-725
Страница 6: ...E 5 LOCATION OF CONTROLS...