background image

 

E1 

IMPORTANT SAFETY INSTRUCTIONS 

When used in the directed manner, this unit has been designed and manufactured to 

ensure your personal safety. However, improper use can result in potential electrical shock 

or fire hazards. Please read all safety and operating instructions carefully before installation 

and use, and keep these instructions handy for future reference. Take special note of all 

warnings listed in these instructions and on the unit. 

 

1.  Read  these  instructions  –  All  the  safety  and  operating  instructions  should  be  read 

before the appliance is operated. 

2.  Keep these instructions – The safety and operating instructions should be kept for future 

reference. 

3.  Heed  all  warnings  –  All  warnings  on  the  appliance  and  in  the  operating  instructions 

should be adhered to. 

4.  Follow all instructions – All operation and use instructions should be followed. 

5.  Do not use this apparatus near water – The appliance should not be used near water; 

for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement, or 

near a swimming pool. 

6.  Clean only with dry cloth – The appliance should be cleaned only as recommended by 

the manufacturer. 

7.  Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat. 

8.  Only use attachments / accessories specified by the manufacturer. 

9.  Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required  when  the 

apparatus  has  been  damaged  in  any  way,  such  as  power-supply  cord  or  plug  is 

damaged,  liquid  has  been  spilled  or  objects  have  fallen  into  the  apparatus,  the 

apparatus  has  been  exposed  to  rain  or  moisture,  does  not  operate  normally,  or  has 

been dropped. 

10. This  appliance  shall  not be  exposed  to dripping  or  splashing  water  and  that  no object 

filled with liquids such as vases shall be placed on the apparatus. 

11.   Power  Sources  –  The  appliance  should  be  connected  to  a  power  supply  only  of  the 

type  described  in  the  operating  instructions  or  as  marked  on  the  appliance.  Do  not 

overload wall outlet. 

12.   Danger  of  explosion  if  battery  is  incorrectly  replaced.  Replace  only  with  the  same  or 

equivalent type. 

13.   Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek 

advice  from  your  local  qualified  service  technician  or  contact  the  distributor  via  the 

telephone number at the back of this instruction manual. 

14.   Caution marking and nameplate are located on bottom of product. 
 
 

                                                   

 

Содержание JEP-250














Отзывы: