Jensen JEP-250, Руководство пользователя

Страница: 8 / 13

E7
4. To automatically search for stations with strong signals, press and hold the
TUNE+ / - button until the frequency digits on display begins to scan then release
the button. The tuner will stop on the first strong signal it finds.
5. Rotate the volume control to obtain the desired sound level.
6. Press the button on main unit to turn unit into standby mode after listening. The
LCD backlight will automatically turn off after 15 seconds.
Notes:
- Manual tune to select weaker stations that might be skipped during automatic tuning.
- If the automatic tuning does not stop on the exact frequency of the station, for
example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning method
to "fine tune" to the exact frequency of the desired station.
- In power on mode, the LCD backlight will automatically turn on as default. Tap the
Dimmer button repeatedly to select bright, dim or backlight off.
HINTS FOR BEST RECEPTION:
- The AM antenna is located inside the cabinet of the unit. If AM reception is weak, change
the position of unit until the internal antenna picks up the strongest signal.
- To insure maximum FM tuner reception, the Telescopic Antenna should be fully extended
and rotated to obtain the best possible station reception.
Radio Station Presets
The unit allows you to store up to 10 AM and 10 FM stations for easy recall at any time.
Setting Preset Stations
1. Press the button to turn on the unit.
2. Tap the AM or FM button to select AM or FM radio mode.
3. Tune to the radio station you want to store in memory by using the TUNE+/- buttons.
4. Press and hold the memory MEM button, the preset channel number “P01” appears on
display and location number “01” blinks.
5. To select desired preset station number, tap the P+ or P- button.
6. To confirm preset location, tap the MEM button.
7. Repeat steps 3 to 6 to store other stations if necessary.
Notes:
- There is an approximate 10 seconds delay when programming, after 10 seconds, the
unit will automatically save the preset and switch back to normal tuner mode.
- You can overwrite a preset station by overwriting and storing the new frequency in its
place.
Recalling a Preset Station
1. Tap the button to turn on the unit.
2. Tap the AM or FM button to select AM or FM radio receiving mode.
3. To select desired preset channel, tap the P+ or P- button repeatedly.