Jensen JEP-250, Руководство пользователя

Страница: 9 / 13

E8
LISTENING TO A WEATHER CHANNEL
1) Weather Band
1. Press the button to turn on the unit.
2. Tap the WB button to select weather band. The " WB " icon appears on the display above
the weather band channel frequency.
3. Tap the TUNE + / - button to select your local weather broadcasting.
4. Rotate the VOLUME control to obtain the desired sound level.
5. To turn the radio off, press the button.
Weather Band Channel Frequency Table
CHANNEL FREQUENCY(MHz)
CH1 162.400
CH2 162.425
CH3 162.450
CH4 162.475
CH5 162.500
CH6 162.525
CH7 162.550
Note: With regard to the NOAA Weather Band: You need to identify which
channel/frequency receives your local weather band report. When you change
locations either to another city or state, you may need to choose a different band to
get the local report in that location.
HINTS FOR BEST RECEPTION:
- To insure maximum weather band reception, the Telescopic Antenna should be fully
extended and rotated to obtain the best possible station reception.
2) RECEIVING AN EMERGENCY WEATHER ALERT
The Weather Alert function allows you to set the weather radio to a standby mode that will
turn the radio on automatically if there is a severe weather emergency in your area. To
receive emergency weather alert warnings, turn the unit on, tune to the strongest local
NOAA weather channel, adjust the volume to a level that you will hear when an alert is
received. The radio remains silent until an “alert” broadcast occurs.
IMPORTANT : It’s recommended that you use the AC adaptor to power the radio when you
use the Weather Alert feature.
1. Press the button to turn on the unit.
2. Tap the WB button to select weather band. The
"
WB
"
icon appears on the display
above the weather band channel frequency.