E-13
CD PLAYER OPERATION
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to read all commercial CDs. It will also read
self-compiled CD-R/CD-RW discs, but it may take up to 10 seconds for the actual playback to
begin. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the
compatibility of the CD compilation software. The manufacturer is not responsible for the playback
quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
PLAYING A CD
1. Press the
POWER
Button
on main unit or remote control to turn on the unit.
2. Tap the
MODE Button
on remote control or main unit to select CD mode and then press the
OPEN/CLOSE
Button
to open the CD door.
3. Place an audio CD o n t h e c e n t e r s p i n d l e with its label side facing out towards the
CD DOOR
. P re s s t h e
Button
to close the CD Door.
4. Unit starts to read the disc, “Cd” shows in display and flashing. After few seconds, the total
number of tracks show one second and then total time of the CD will be shown on the
LCD
DISPLAY.
5. Press the
PLAY/PAUSE
Button
on main unit or remote control, PLAY indicator
shows in
display, the CD will start playing from first track.
6. Press the volume control
/-
Button
on main unit or
remote control
to adjust to the
desired volume level.
7. To pause playback, press the
PLAY/PAUSE
Button
on main unit or remote control. The
track time will be paused and PAUSE indicator
will show in display. To resume playing, press
the CD
PLAY/PAUSE
Button
again.
8. You can choose to play your favorite track directly by pressing either the
SKIP NEXT
Button
or
SKIP PREVIOUS
Button
. The LCD Display will indicate the correct track number
selected.
9. To locate a particular section within a track, press and hold the
or
Button
until the
section is found. Release the button to continue playing your selection.
10. To stop playing, press the
STOP Button
.
11. Turn off the JBS-225 when you are done listening.
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the
SKIP NEXT
or
SKIP PREVIOUS
Button
to go
to the next track or go back to the beginning of the current track.
2. During playback, press and hold the
or
Button
to search within the current track with
audible high speed playback.
DIFFERENT PLAY MODES (REMOTE CONTROL ONLY)
Press the
PLAY
MODE
Button
on remote control repeatedly to select different of play modes
when CD or MP3 CD is playing.
When playing CD, the play modes are shown as below.
Repeat 1 Repeat All Random Normal
REPEAT 1 - the track being played and will repeat continuously. Repeat one icon
shows in
display.
REPEAT ALL - all tracks will repeat continuously. Repeat All icon
shows in display.
Содержание JBS-225
Страница 8: ...E 7 LOCATION OF CONTROLS MAIN UNIT ...