19
COMPLETE INSTALLATION
1.
Turn the water supply line valve to the “Open”
position.
2.
Turn the refrigerator switch to the ON position. See
“Power
On/Off Switch” in the Use & Care Guide for
instructions. Wait a few minutes. Check the water line
connections for leaks.
3.
Remove all boxes, parts packages and packing
materials from
the interior of the refrigerator. See
the “Cleaning” section in the Use & Care Guide for
instructions. Remove the film and cardboard from
the grille and doors or door frame, depending on your
model.
4.
Install the shelves and bins in the refrigerator and
freezer
compartments.
5.
The controls are preset at the factory to the midpoint
setting.
Check that the compressor is operating
properly and that all the lights are working.
6.
Flush the water system before use. See “Water
System
Preparation.”
To get the most efficient use from your new built-in
refrigerator, read the Use & Care Guide. Keep Installation
Instructions and Use & Care Guide near the built-in
refrigerator for easy reference.
