COMPONENT ACCESS (CONT.)
4-14
n
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
5.
Locate the fill tube from behind the refrigerator and remove
two (2) 1/4" hex head screws.
6.
Pull fill tube and water line out of refrigerator.
Removing the Fill Tube (Dispensing
Units Only)
1. Complete the steps
from section Removing the Ice Maker
Assembly (Dispensing Units Only).
2. Complete the steps
1-3
from section Accessing the Ice Maker
Water Inlet and Isolation Valves.
3. Remove the water line from the ice maker water inlet valve
by removing the lock ring from the John Guest fitting first.
4. Remove center back panel by removing six (6) 1/4" hex head
screws.
5. Pull water line out of conduit.
6. Complete the steps
from section Removing the Front
Decorative Cover.
7. Complete the steps
from section Removing the Front
Access panel.
8. Complete the steps
from section Removing the Unit Top
Cover.
Содержание KitchenAid KBSD708M S00 Series
Страница 4: ...iv n JennAir and KitchenAid 36 42 and 48 Built In Side by Side Refrigerators Notes...
Страница 42: ...Component Access 4 22 n JennAir and KitchenAid 36 42 and 48 Built In Side by Side Refrigerators Notes...
Страница 44: ...JennAir and KitchenAid 36 42 and 48 Built In Side by Side Refrigerators W11636548 Rev A...
