SIDE BURNER HOSE QUICK-CONNECT
Estimated Assembly Time: Approximately 5-7 minutes
Required Tools: Phillips Screwdriver
1. Insert the side burner hose with female sleeve through side panel of cart (Top drawing).
2. Push the sleeve of the female socket back and insert the male end of connector. Release the sleeve.
3. Push the male end into the socket until the sleeve snaps forward to lock the plug in place.
4.
To disconnect, push the sleeve back and pull out the male end (bottom drawing).
7
WARNING
1. Insert the coupling half (socket) into the gas
supply line in accordance with NFPA54/ANSI
Z223.1 FUEL gas code.
2. Prior to inserting the plug, test the connection
for leaks using the leak test instructions on
page 10. After the leak test, rinse the
connection with clean water to remove any
corrosive residue.
3. Do not use an open flame to test for leaks.
