background image

 

 

TROUBLESHOOTING 

 
 

WHEN TO LOOK FOR SPIDERS 

You should inspect the burners at least twice a 
year or immediately after any of the following 
conditions occur: 
 
1.  The smell of gas in conjunction with burner

flames appearing yellow. 

 
2.  The grill does not reach temperature. 
 
3.  The grill heats unevenly.

 

 
4.  The burners make popping noises.

 

 

 
 
 
 
 
 
 
 

 WARNING 

Spiders and insects can nest inside the burners 
of the grill and disrupt gas flow. This very 
dangerous condition could cause a fire behind 
the valve panel, thereby damaging the grill and 
making it unsafe for operation.  
 
Inspect the grill at least twice a year.  

 
 
 
 

BEFORE CALLING FOR SERVICE 

If the grill does not function properly, use the following checklist before contacting your dealer for service. You 
may save yourself the cost of a service call. 

 

PROBLEMS WHAT 

TO 

DO 

Grill will not light when the control 
knob is rotated. 

• 

Clean wire(s) and/or electrode with rubbing alcohol and a 
clean swab. Wipe with a dry cloth. 

 

• 

Make sure the wire is connected to the electrode assembly. 

 

• 

Check to see if the other burners operate. If so, check the gas 
orifice on the malfunctioning burner for an obstruction. 

 

 

 

 

Burner flame is yellow or orange, 
in conjunction with gas odor. 

• 

Call customer service at 1-800-554-5799. 

 
 

 

Low heat with the control knob on 
the “HI” setting. 

• 

Check to see if the fuel hose is bent or kinked. 

• 

Make sure the grill area is clear of dust. 

 

• 

Check your gas regulator and pressure.  

 

• 

Make sure the burner and orifice are clean.  

 

 

 

 

 

 
 

 

18

Содержание 730-0164




























Отзывы: