9
B. Calibration/Setting Mode
Pressing the “
CAL/VIEW”
key for about two seconds during the measure mode will bring-
up the first page of eight pages of the
Calibration/Setting
mode. Pressing “
CAL/VIEW”
key will switch to the next page. At the last page, press “
CAL/VIEW”
key again will return
the user to measure mode.
Below is a simple flowchart showing the path of the “
CAL/VIEW”
key:
The user can change any blinking words or digit by pressing the
“UP”
or
“DOWN”
keys.
For options in digit format, the user needs to press the
“MODE”
key to move to the next
digit. If the user is satisfied with the selection made, press the “
ENTER”
key to save the
changes and move to the next option. If the user does not need to change the current
blinking option just press the “
ENTER”
key to move to the next selection.
