10
1. Password check page
a. Screen illustration
PASSWORD CHECK
ENTER PASSWORD:0000
OR PRESS CAL TO VIEW
TO CHANGE SETTINGS
THE SETTINGS ONLY
"
PASSWORD LOOKED
The user will only see this page if the unit is password locked.
To change any settings or calibration, the user needs to unlock the system to remove the
“
PASSWORD LOCKED
” message by entering the correct 4-digit password.
The user can still view all the pages of
Calibration/Setting mode
if the system is
password locked by just pressing the “
CAL/VIEW”
key on this page. If the unit is
“
PASSWORD LOCKED
”, going to
Calibration/Setting mode
will not affect the function
of the relays.
[
Note:
If the unit is
not locked
then every time the user enters the
Calibration/Setting
mode
the relays and analog out will be
frozen
.]
2. User setting page
a. Screen illustration
USER SETTINGS
!! WARNING !!
ARE NOW FROZEN!
RELAYS & ANALOG OUT
PRESS CAL TO PROCEED
The user will only see this page if the unit is not password locked. This page is just a
