Jegs 81026 Скачать руководство пользователя страница 6

Страница: 6 / 10

Charger Operation

Before using your tool for the first time, the battery should be fully charged. If the battery

pack is installed in the tool, remove it following the charging procedure below.

Charging Procedure

Make sure power circuit voltage is the same as the shown on the charger specification.

Plug the charger into outlet before inserting battery pack.

Insert battery pack into charger. Indicator light on charger changes to show the charging

process

Battery is charging (Solid Red)

The charging is complete (Solid Green)

Red light flashing at a fast rate, replace battery

Charger detected a weak or damaged battery

Stop charging battery.

Disconnect charger from power source and remove battery pack from charger after full

charged.

CAUTION!

Charge the battery in clean and dry location when temperatures are between 10℃ to 40℃.

Battery temperature will increase during and shortly after use. Battery may not accept a

full charge if charged immediately after use. Allow the battery pack to cool to room

temperature before charging for best charging.

Important note:

When battery pack is fully charged, disconnect the charger from the

power source and remove the battery pack from the charger

1-800-345-4545 jegs.com

Содержание 81026











Результаты поиска

Содержание 81026

Отзывы:

Похожие инструкции для 81026

Бренды по названию

Популярные бренды

Jegs 81026, Руководство по установке

Результаты поиска

Содержание 81026

Отзывы:

Похожие инструкции для 81026

Бренды по названию

Популярные бренды