Jefftron Leviathan, Руководство по установке

Страница: 9 / 16

8
- Change name visible on the Bluetooth list, max.
12 characters. After you save the name, Leviathan
- V2 will be disconnected from phone.
- Info about application and firmware version.
Bootloader and Hardware version is constant.
- If you have any questions or problems, please
contact us at email support@jefftron.cz .
- Update fixes bugs and adds new features. It
takes about 1minute to complete. It will end with
successful message and short vibration.
First time shooting
1. Connect battery, after 1s you will feel a short vibration. This means that the power-up
self-test is complete and OK.
2. Put the gun into SAFE - nothing happen when is trigger pulled.
3. Put the gun into SEMI and it will fire once.
4.
Put the gun into AUTO and pull the trigger shortly. Gun should fire a burst of 3 rounds.
If you held down the trigger longer the gun will go to auto fire.
5.
If everything works as described, congratulations for the correct installation the Levi-
athan-V2. If not, check what is written in the error log and the 12-14 pages in this manual
6. Pair with the leviathan-V2 and update firm-
ware to the newest version. Your smartphone has
to be connected to the internet.
Have your application and firmware updated!
WARNING - Disconnect battery, when you don’t
use the gun! Otherwise it will lead to destroy
battery or its fire. Because Leviathan - V2 drains
small amount of current from it all the time.