Jefftron Leviathan, Руководство по установке

Страница: 11 / 16

10
Change parameters page 2/2
Active Brake:
It uses the excess energy from the motor to stop
it. Lower braking intensity spares the motor coils.
Spring is fully released, parts in gearbox aren‘t
under strain. Higher power braking is suitable
for weapons with high RoF. The effect is the most
powerful with torque motor.
Pre-cocking:
The piston is partly compressed after fire on SEMI.
Max. compression is about 70% intensity (de-
pends on the gun setup). There isn‘t almost any
delay between trigger pull and shot. Pre-cocking
works only with active brake. If you hold the trig-
ger after firing at least 3 seconds, gun shots again,
but this time with a piston in a released position,
use it before store the gun. Please note: using pre-
cocking increases wear and tear on the gearbox.
Delay between shots:
It is for simulation the delay from gun reload or recoil. In this time is not possible to shoot
again. Motor vibrates shortly after pass time delay to notify the gun is ready for shooting.
Low Battery Indication:
It is used for only Li-xx batteries. When is low battery voltage detected, gun vibrates after
each shot. It is time to replace the battery at the nearest opportunity. When the battery
is discharged the gun vibrates instead of fire. WARNING: battery is still slowly discharged.
SAVE: You can save these parameters under custom name into your smartphone.
FACTORY RESET:
It restores parameters to factory state (password is unchanged).