Jefftron Leviathan, Руководство по установке

Страница: 2 / 16

1
Leviathan - V2 parameters
It is processor controlled mosfet with Bluetooth communication. Device is fully integra-
ted inside the gearbox version 2 instead of the original trigger contacts, compatible with
Tokyo Marui standard. Completely made wires with 30A mini fuse and deanT connector. It
adds new shooting modes, controls RoF, pre-cocking, active braking, low battery indica-
tion, statistics... controls via app in the smartphone. Usable for battery with max. 17 volts.
Insertion procedure of Leviathan-V2 into the gearbox
1.
Remove and open the gearbox according to the normal gun disassembly procedure.
2. Take out all the internals from the gearbox and clean the vaseline, oils after them. Check
the gearbox for edges. Grind for smooth surface to prevent Leviathan board damage.
Package contents
- Leviathan - V2 drop-in module with wiring
- Screw with washer for securing device in
the gearbox
- CNC trigger with hair trigger feature
- Screw for the trigger zero path adjustment
- Foam to keep device in place
- Installation manual
Safety warning
- Installation of this device into the gearbox requires advanced technician skills!
- Please read these informations before installing your device to prevent any damage.
- Short circuit or incorrectly connected battery will cause immediate damage to the de-
vice which is not covered by the warranty. It can lead to fire or even battery explosion.
- Disconnect battery, when you aren‘t using the gun! Otherwise you will fully discharge
the battery. Because the device drains small amount of current from it all the time.
- Don‘t connect battery when gun pointing towards you, another person or an animal.
- Don‘t modify, repair, put into any kind of liquids or thermal shock the Leviathan - V2.