Jefftron Leviathan, Руководство по установке

Страница: 10 / 16

9
Change parameters page 1/2
Orange stripe = not paired , green stripe = paired
Paired = loads parameters from Leviathan - V2.
Change parameter ->
shows „
writting...
„ in the
green stripe. Text dissapear -> parameter is saved
Fire modes with Selector on safe/semi/auto :
-
SAFE
: no responding on the trigger pull.
- Semi : it fires single shot per trigger pull.
- Semi/BurstX : short trigger pull fires single shot,
long trigger pull fires burst.
- Double trigger : fire semi when trigger is pulled
and semi again when it is released in less than 3s.
- BurstX : gun shoot burst per trigger pull.
- BurstY : short trigger pull fire burstX,
long trigger pull fire burstX plus burstY bullets.
- BurstX/Full : short trigger press fires burstX, long
trigger press makes auto fire.
- Full : gun makes auto fire until trigger is released.
Burst functions:
It enables you to shoot a set number of BBs on one
trigger pull. It will always complete the burst. Eve-
ry selector has its own burst settings.
Rate of fire:
It is useful for solving problems with too high gun
RoF. This function makes breaks between shots to
reduce RoF. It gives you fast trigger response even
with very low rate of fire, just like in a real gun.